#ifndef __INTERFACE_ERRORS_H__
#define __INTERFACE_ERRORS_H__

#define COM_NO_ERROR			0	/**<\ingroup err
											No error occurred during function call */
#define COM_ERROR				-1	/**< \ingroup err
											Error during com operation (could not be specified) */
#define SEND_ERROR				-2  /**< \ingroup err
											Error while sending data */
#define REC_ERROR				-3  /**< \ingroup err
											Error while receiving data */
#define NOT_CONNECTED_ERROR		-4  /**< \ingroup err
											Not connected (no port with given ID open) */
#define COM_BUFFER_OVERFLOW		-5  /**< \ingroup err
											Buffer overflow */
#define CONNECTION_FAILED		-6	/**< \ingroup err
											Error while opening port */
#define COM_TIMEOUT				-7	/**< \ingroup err
											Timeout error */
#define COM_MULTILINE_RESPONSE	-8	/**< \ingroup err
											There are more lines waiting in buffer */
#define COM_INVALID_ID			-9  /**< \ingroup err
											There is no interface open with the given ID */
#define COM_NOTIFY_EVENT_ERROR	-10 /**< \ingroup err
											The event for the notification could not be opened */
#define COM_NOT_IMPLEMENTED		-11 /**< \ingroup err
											The function was not implemented (e.g. only RS-232 communication provides this feature and it was called for IEEE488) */
#define COM_ECHO_ERROR			-12 /**< \ingroup err
											Error while sending "echoed" data */
#define COM_GPIB_EDVR			-13 /**< \ingroup err
											IEEE488: System error                           */
#define COM_GPIB_ECIC			-14 /**< \ingroup err
											IEEE488: Function requires GPIB board to be CIC */
#define COM_GPIB_ENOL			-15 /**< \ingroup err
											IEEE488: Write function detected no Listeners   */
#define COM_GPIB_EADR			-16 /**< \ingroup err
											IEEE488: Interface board not addressed correctly*/
#define COM_GPIB_EARG			-17 /**< \ingroup err
											IEEE488: Invalid argument to function call      */
#define COM_GPIB_ESAC			-18 /**< \ingroup err
											IEEE488: Function requires GPIB board to be SAC */
#define COM_GPIB_EABO			-19 /**< \ingroup err
											IEEE488: I/O operation aborted                  */
#define COM_GPIB_ENEB			-20 /**< \ingroup err
											IEEE488: Non-existent interface board           */
#define COM_GPIB_EDMA			-21 /**< \ingroup err
											IEEE488: Error performing DMA                   */
#define COM_GPIB_EOIP			-22 /**< \ingroup err
											IEEE488: I/O operation started before previous operation completed                    */
#define COM_GPIB_ECAP			-23 /**< \ingroup err
											IEEE488: No capability for intended operation   */
#define COM_GPIB_EFSO			-24 /**< \ingroup err
											IEEE488: File system operation error            */
#define COM_GPIB_EBUS			-25 /**< \ingroup err
											IEEE488: Command error during device call       */
#define COM_GPIB_ESTB			-26 /**< \ingroup err
											IEEE488: Serial poll status byte lost           */
#define COM_GPIB_ESRQ			-27 /**< \ingroup err
											IEEE488: SRQ remains asserted                   */
#define COM_GPIB_ETAB			-28 /**< \ingroup err
											IEEE488: The return buffer is full.             */
#define COM_GPIB_ELCK			-29 /**< \ingroup err
											IEEE488: Address or board is locked.            */

#define COM_MAX_ERROR			-1000

/**
 * \ingroup err
 * Simple macro to check if an error was caused by basic communication functions.
 */
#define IS_COM_ERROR(err) \
	 ( (err)<0 && (err)>COM_MAX_ERROR )

#endif //__INTERFACE_ERRORS_H__